ACE BACKSTAGE Super Double Wide Stage Pocket - Manual (Page 2)

ACE BACK STAGE CO., IN C.
CLEAR C OM DMX12 PUSH PUSH
Ace Backstage Co., Inc. Stage Pocket Systems | 24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355 | Tel: 661-295-5760 | Fax: 661-295-1122 | Web: www.acebackstage.com
2 of 6
oven cured powder coat electro-static applied inside and
outside entire Trim Bezel Lid and Mounting Flange assem-
bly. Decorator neutral Antique Copper Vein and Textured
Black finishes are standard. A Solid Brass Trim Bezel Lid
and Mounting Flange with a brushed finish is also available
by special order. Super Double Wide Stage Pocket Body
Back Box is finished with a clear Zinc, Mil Spec QQ-Z-325E
Type I, Class II.
• RUBBER LID STOPS: Rubber lid stops set into recessed
mount cradle the lid to prevent lid rattle.
• UL LISTED: Super Double Wide Stage Pockets compli-
ance Standard 514A in combination with inner floor pocket
file FLOOR BOX 44LK.
MATERIALS
ACE Super Double Wide Stage Pocket Trim Bezel Mounting
Flanges are made of 1/8” (nominally 11 ga. (.120”)) thick
CRS steel, the Lid is made from 10 ga. (nominally .135”)
thick CRS steel, and the Super Double Wide Stage Pocket
Body Back Box is made from 14 ga. (.071”) thick CRS
steel. The exception to this is the Brass Super Double Wide
Stage Pocket Trim Bezel Lid and Mounting Flange which is
made of 1/8” (nominally 11 ga. (.120”)) thick Half Hard
Solid Brass.
FINISHES
ACE Super Double Wide Stage Pockets come with a scratch/
wear resistant finish, oven cured powder coat electro-static
applied inside and outside the entire Trim Bezel Lid and
Mounting Flange assembly. Decorator neutral Antique
Copper Vein and Textured Black finishes are standard.
A Solid Brass Trim Bezel Lid and Mounting Flange with a
brushed finish is also available by special order*.
INCLUDES
ACE Super Double Wide Stage Pockets Include:
• (1) Super Double Wide Pocket Body Back Box w/Brackets
• (1) Trim Bezel Lid and Mounting Flange Assembly
• (1) Lid (Standard w/ option for Carpet, Locking etc.)
• (2) Hinged Slot Closures
• (2) Hinge Pins
• (2) Springs
• (12) #8 Self Tapping Sheet Metal/Wood Screws
SPECIFICATIONS
ACE Super Double Wide Stage Pocket Size:
• Super Double Wide Stage Pocket Body Back Box Size:
10.000” W x 6.000” H x 18.000” D
• Super Double Wide Pocket Trim Bezel Lid & Mounting
Flange Size:
10.500” W x 0.937” H x 18.500” D
ACE Super Double Wide Stage Pocket Connector
Capacity:
• 48 “Connectrix”, Neutrik®, or Switchcraft® Connectors
ACE Super Double Wide Stage Pocket Install Cutout
Dimensions:
• 10.000” W x 18.000” L
ACE Super Double Wide Stage Pocket Material:
• CRS Steel and/or Solid Half Hard Brass
ACE Super Double Wide Stage Pocket Panel
Capacity:
• (8) #PNL-100 Series “Connectrix” Panels OR
• (8) #PSW-100 Series Switchcraft® Panels OR
• (4) #PNL-120 Series “Connectrix” Panels OR
• (2) #PNL-140 Series “Connectrix” Panels OR
• Various multi panel combinations from panels listed above
CONNECTOR CAPACITY
ACE Super Double Wide Stage Pockets Connector
Capacity:
• 48 “Connectrix”, Neutrik®, or Switchcraft® Connectors
“CONNECTRIX” Connectors combine Neutrik® “D”
and Switchcraft® “E” Mounting Hole Patterns for
Greater Flexibility
The “CONNECTRIX” system connectors may be used in
any of the “CONNECTRIX” system panels utilizing our
“CONNECTRIX” cutout which incorporates the popular
mounting pattern of the Neutrik “D” and Switchcraft “E”
series mounting patterns. Connectors using the generous
rectangular “CONNECTRIX” cutout will add to a growing ar-
ray of adapter-mounted standard connectors. The adapter
mount is plastic and provides ground isolation between the
panel and connector.
When ordering, please specify connector model number,
model name, and type of connector as well as panel model
number (#PNL-100 Series, #PNL-120 Series, or #PNL-140
Series) the connectors will be loaded into. NOTE: Specific
High Density (HD) and Sub-D pattern connectors will re-
quire either 2 or 3 “CONNECTRIX” Horizontal Spaces or 2
or 3 “CONNECTRIX” Vertical Spaces, depending on connec-
tors selected. Connectors may be loaded into panels with
nutcerts and nut/bolts or black aluminum pop rivets.
ACE Super Double Wide Stage Pockets Connector
Types:
• “Connectrix” Connectors (fits Neutrik®/Switchcraft®)
• Switchcraft® Connectors
• Custom Panel Connectors (custom panel cutout required)
CONTINUED...
ACE BACKSTAGE CO., INC.
STAGE POCKET SYSTEMS
24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355
Tel: 661-295-5760 | Fax: 661-295-1122
Email: [email protected] | Web: www.acebackstage.com
DATA SHEET
Stage Pocket
Data Spec Sheet
Revision: 1A.134-234
Model Numbers: #134-xxyy, #234-xxyy (xx= Lid Type and yy= Finish Type)
Model Name: Super Double Wide Stage Pocket - Super Double Capacity Horizontal Panel Pocket
Model Description: Pocket with brushed metal or powder coat finish, choice of lid, with optional panel(s) and connectors
*NOTE: Connector capacity limitations apply depending on connectors and panels used.