ACE BACKSTAGE Super Double Wide Stage Pocket - Manual (Page 3)

ACE BACK STAGE CO., IN C.
CLEAR C OM DMX12 PUSH PUSH
3 of 6
Ace Backstage Co., Inc. Stage Pocket Systems | 24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355 | Tel: 661-295-5760 | Fax: 661-295-1122 | Web: www.acebackstage.com
#PNL-120 SERIES PANELS: Any 4 Panels in this series or
#PNL-120 #PNL-124 #PNL-126
#PNL-128 #PNL-1210 #PNL-1212
#PSW-100 SERIES PANELS: Any 8 Panels in this series or
#PSW-100 #PSW-102 #PSW-103 #PSW-104 #PSW-105 #PSW-106
SUPER DOUBLE WIDE POCKET “CONNECTRIX”
SYSTEM PANEL CONFIGURATIONS
#PNL-100 SERIES PANELS: Any 8 Panels in this series or
#PNL-100 #PNL-102 #PNL-103 #PNL-104 #PNL-105 #PNL-106
SUPER DOUBLE WIDE POCKET SWITCHCRAFT®
“E” MOUNT PANEL CONFIGURATIONS
SUPER DOUBLE WIDE POCKET COMBINATION
PANEL CONFIGURATIONS
Various multi-panel combinations from panels listed below
Various combination of Panel Series
#PNL-100, #PNL-120, #PNL-140, #PE, and
#PSW-100
ACE BACKSTAGE CO., INC.
STAGE POCKET SYSTEMS
24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355
Tel: 661-295-5760 | Fax: 661-295-1122
Email: [email protected] | Web: www.acebackstage.com
DATA SHEET
Stage Pocket
Data Spec Sheet
Revision: 1A.134-234
Model Numbers: #134-xxyy, #234-xxyy (xx= Lid Type and yy= Finish Type)
Model Name: Super Double Wide Stage Pocket - Super Double Capacity Horizontal Panel Pocket
Model Description: Pocket with brushed metal or powder coat finish, choice of lid, with optional panel(s) and connectors
#PNL-140 SERIES PANELS: Any 2 Panel in this series or
#PNL-140 #PNL-1425
PANEL CAPACITY
ACE Super Double Wide Stage Pockets Panel
Capacity:
• (8) #PNL-100 Series “Connectrix” Panels OR
• (8) #PSW-100 Series Switchcraft® Panels OR
• (4) #PNL-120 Series “Connectrix” Panels OR
• (2) #PNL-140 Series “Connectrix” Panels OR
• Various multi panel combinations from panels listed above
“CONNECTRIX” SYSTEM PANEL DESCRIPTION
Many pre-cut stock #PNL-100 Series, #PNL-120 Series,
#PNL-140 Series “CONNECTRIX” System connector panels
and #PSW-100 Series Switchcraft® connector panels are
available for the Super Double Wide Stage Pocket. Standard
“CONNECTRIX” and Switchcraft® Panels are created from
high strength, tough, aircraft aluminum alloy (6061-T6)
that is 1/16” (.062”) or 1/8” (.125”) thick.
The standard panels mount with (4 or 6) self-tapping screws.
Each panel is CNC machined to precisely mate with the
designated connectors and in the pocket mounting holes.
Each Standard “CONNECTRIX” and Switchcraft® Panel is
finished with oven cured semi-gloss black powder coat.
Most panels provide header space for custom engraving
which is fast and easily accomplished on a separate dedi-
cated CNC engraving machine. The finished panels show
bright aluminum in the engraved characters and need not
be back filled. ACE standard panels are flat, strong, and
rigid like the typical thinner mild steel panels. Because
the panels are machined and not punched they stay flat
and undistorted unlike punched panels which distort in the
punching process.
The machined “CONNECTRIX” style cutouts combine popular
mounting patterns of the Neutrik “D” series and Switchcraft
“E” series connectors with a generous rectangular cutout
that mates with a growing array of adapter-mounted
standard connectors. The adapter mount is plastic and
provides ground isolation between the panel and connector.
Using the “CONNECTRIX” system panel it is possible to
mount any combination of modular jacks (RJ45, RJ11 etc.),
BNCs, dual RCAs, mic jacks, speaker jacks and numerous
other standard connectors without a single custom punch.
This system provides for more connectors and mounting
options in stock standard ACE panels. The benefit is faster
order turn around and lower cost. Less custom fabrication
for custom spec results with off-the-shelf stock prices.