ACE BACKSTAGE Super Double Wide Stage Pocket - Manual (Page 6)

ACE BACK STAGE CO., IN C.
CLEAR C OM DMX12 PUSH PUSH
SUPER STAGE POCKET SPECIFICATIONS FOR WOOD AND CONCRETE FLOOR INSTALLATION
3.375"
2.335"
7.250"
8.000"
2.530"
10.000" SQUARE
TRIM BEZEL
MOUNTING
FLANGE &
LID ASSEMBL Y
NOMINAL
OPENING
REMOVABLE SPRING LOADED
HINGE PINS PERMIT EASY LID
EXCHANGE FOR CARPET, LOCKING,
AND STANDARD LID CONFIGURA TIONS
CARPET
FLOOR
LEVEL
WOOD
FLOOR
"CONNECTRIX" PANEL SYSTEM
COMBINATION OF "#PNL-100",
"#PNL-120", OR "#PNL-140"
STAGE POCKET PANELS
BARRIER ISOLA TED
LOW VOL TAG E SECTION
CREATED WHEN #BRK102
BRACKET KIT ASSEMBLY
IS INSTALLED
BARRIER ISOLA TED
AC SECTION CREA TED
WHEN #BRK102 BRACKET
KIT ASSEMBLY IS INSTALLED
SUPER STAGE POCKET
BACK BOX #BRK102BBX
SET THE SUPER ST AGE POCKET
BACK BOX #BRK102BBX SECURELY
BRACED INTO T HE FLOOR TO PROVIDE
SUPPORT EQUAL T O THE FLOOR
LOADING REQUIREMENTS, ACCOUNTING
FOR ANY HEIGHT OFFSET REQUIRED
FOR THE FINISHED FLOOR
WOOD
FLOOR
FRAMING
CARPET
FLOOR
LEVEL
LID (BLIND HINGE), SPRING LOADED PINS,
AVA ILABLE IN STANDARD FLUSH , STANDARD
FLUSH LOCKING, OR RECESSED CARPET
WOOD
FLOOR
FRAMING
WOOD
FLOOR
.500" .500"
3.375"
.500"
2.335"
7.250"
8.000"
2.530"
.500"
10.000" SQUARE
TRIM BEZEL
MOUNTING
FLANGE &
LID ASSEMBL Y
NOMINAL
OPENING
REMOVABLE SPRING LOADED
HINGE PINS PERMIT EASY LID
EXCHANGE FOR CARPET, LOCKING,
AND STANDARD LID CONFIGURA TIONS
CARPET
FLOOR
LEVEL
"CONNECTRIX" PANEL SYSTEM
COMBINATION OF "#PNL-100",
"#PNL-120", OR "#PNL-140"
STAGE POCKET PANELS
BARRIER ISOLA TED
LOW VOL TAG E SECTION
CREATED WHEN #BRK102
BRACKET KIT ASSEMBLY
IS INSTALLED
BARRIER ISOLA TED
AC SECTION CREA TED
WHEN #BRK102 BRACKET
KIT ASSEMBLY IS INSTALLED
SUPER STAGE POCKET
BACK BOX #BRK102BBX
CARPET
FLOOR
LEVEL
LID (BLIND HINGE), SPRING LOADED PINS,
AVA ILABLE IN STANDARD FLUSH , STANDARD
FLUSH LOCKING, OR RECESSED CARPET
CONCRETE
FLOOR
CONCRETE
FLOOR
Ace Backstage Co., Inc. Stage Pocket Systems | 24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355 | Tel: 661-295-5760 | Fax: 661-295-1122 | Web: www.acebackstage.com
6 of 6
ACE BACKSTAGE CO., INC.
STAGE POCKET SYSTEMS
24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355
Tel: 661-295-5760 | Fax: 661-295-1122
Email: [email protected] | Web: www.acebackstage.com
DATA SHEET
Stage Pocket
Data Spec Sheet
Revision: 1A.134-234
Model Numbers: #134-xxyy, #234-xxyy (xx= Lid Type and yy= Finish Type)
Model Name: Super Double Wide Stage Pocket - Super Double Capacity Horizontal Panel Pocket
Model Description: Pocket with brushed metal or powder coat finish, choice of lid, with optional panel(s) and connectors
1) - Locate box and install conduit in accordance with local codes
2) - Secure box to reinforcing bars, mesh or otherwise to assure the box is fixed below the finished floor
3) - Grease the inside of the cement cover, the mating box flange and the box seams
4) - Attach the cover to the box and tape the seems
5) - Grease the outside of the cover
6) - Pour concrete
7) - After the concrete has set, remove the concrete cover
8) - Install wire and other devices as required
1) - Locate box and install conduit in accordance with local codes
2) - Secure box to wood floor framing, floor joist or otherwise to assure the box is fixed below the finished floor
3) - Provide support for the box equal to the floor loading requirements
4) - Account for any height offset required for the finished floor
5) - Install wire and other devices as required using standard electrical conduit
6) - After box and conduit are secured, complete the connector/panel installation
7) - Install trim bezel/lid hinge assembly to secured box with screws provided