ACU-RITE VUE READOUTS - Manual (Page 38)

24 I
I – 3 Milling Specific Oper
ations
Linear Pattern
Information required:
„ Linear pattern type (array, or frame)
„ First hole (1st hole of the pattern)
„ Holes per row (number of holes in each row of pattern)
„ Hole spacing (the spacing, or offset between each hole in the row)
„ Angle (the angle, or rotation of the pattern)
„ Depth (the target depth for drilling in the tool axis)
„ Number of rows (number of rows in the pattern)
„ Row spacing (the spacing between each row of the pattern)
Information entry, and operation of the Linear Pattern feature is very
similar to the Hole Pattern feature described earlier.