ACU-RITE VUE READOUTS - Manual (Page 54)

40
II – 1 Installation Set
u
p
II – 1 Installation Setup
Installation Setup Parameters
Installation Setup is accessed by pressing the SETUP soft key, which
brings up INSTALL. SETUP soft key.
Installation Setup parameters are established during the initial
installation, and most likely, will not often change. For this reason, the
installation setup parameters are protected by the passcode.
See "Readout Parameter Access Code" on page v.
After entering the Access Code, the cursor will default to the Encoder
Setup field upon opening Installation Setup.
Job, and Installation Setup parameters can be imported, or exported
over the “Regular Type B” USB port.
Exporting the current Installation Setup:
8 Press the IMPORT/EXPORT soft key in the Setup screen.
8 Press EXPORT to upload the current operating parameters to a PC.
8 To exit, press the C key.
Importing a new Tool Table
8 Press the IMPORT soft key in the Setup screen.
8 Press IMPORT to download operating parameters from a PC.
8 To exit, press the C key.