ACU-RITE VUE READOUTS - Manual (Page 4)

iv
VUE K
e
y La
y
out
Single Axis VUE Tool, and Datum keys
„ The TOOL, and DATUM keys are soft keys on a single axis VUE.
These are hard keys on a 2, and 3 axis VUE. See "VUE Hard Keys"
on page 7.
Opens the Tool Table. See "Tool Table" on page 14 for
Milling. See "Tool Table" on page 30 for Turning.
Opens the Datum form to set the datum for each axis.
See "Datum Setting" on page 17 for Milling. See
"Datum Setting" on page 32 for Turning.
Soft Key function Soft key
Opens the Job Setup menu and provides
access to the Installation Setup soft key (see
"Job Setup Parameters" on page 11).
Press when ready to identify a reference mark
(see "ENABLE/DISABLE REF function" on page
9).