AirLive CW-720 - Manual (Page 10)

1. Introduction
5 AirLive CW-720 User’s Manual
5. LAN Socket
The LAN socket is a RJ-45 connector for connections to 10Base-T Ethernet or
100Base-TX Fast Ethernet cabling. This Ethernet port built N-Way protocol can detect
or negotiate the transmission speed of the network automatically. Please use Category
5 cable to connect the Network Camera to a 100Mbps Fast Ethernet network switch or
hub.
6. LAN LED (green color)
This LED will be flashing while network accessing via Ethernet.
7. Power / Wireless LED (orange color)
This LED is used to indicate whether DC power is on or not. In addition, this LED will be
flashing while the wireless accessing of the Camera.
1.6 Hardware Installation
1. Attach the Camera with the included stand
2. Place the Camera on the table or fix it onto ceiling or wall
Use three screws to fix the Network Camera onto the ceiling or wall. You could also put
the Network Camera on the table directly.