AirLive CW-720 - Manual (Page 52)

4. Monitor the Image Section
47 AirLive CW-720 User’s Manual
6. The upgrade progress information will be displayed. Once the uploading process
completed, the device will reboot the system automatically.
7. Please wait for timer countdown, and then you can use IPWizard II to search the device
again.
Warning!!! The download firmware procedure can not be interrupted. If the power
and/or network connection are broken during the download procedure, it might
possibly cause serious damage to the device.
Strongly suggest that DO NOT upgrade firmware via Wireless LAN due to high error
rate possibly and don't allow any other clients to access this unit during updating
procedure.
Be aware that you should not turn off the power during updating the firmware and
wait for finish message.
Furthermore, the firmware upgrade procedure always is risk and do not try to
upgrade new firmware if it’s not necessary.
System Restart:
The device is restarted without changing any of the network settings. It means the IP
address of the device will not change after firmware upgrade.
4.5 Video – Configure Profile
This device provides 2 modes of video profile. The first one is 1.3 Mega mode which
supports video resolution up to 1.3 Mega-pixel. The second one is 720p mode which
supports video resolution up to 1 Mega-pixel. User only can select either 1.3 Mega or 720p
mode to operate the camera. Switching 1.3 Mega and 720p mode, the device will take time
to reboot system.