AirLive CW-720 - Manual (Page 79)

5. Troubleshooting & FAQ
AirLive CW-720 User’s Manual 74
condition around the Camera brighter.
Noisy images occur. The video images might be noisy if the device is located in a
very low light environment. Make the condition around the
camera brighter or turn the White-light LED on.
Miscellaneous
Cannot play the
recorded ASF file
Have installed Microsoft®’s DirectX 9.0 or later and use the
Windows Media Player 11.0 or later to play the AVI filed
recorded by the Device.
5.2 PING
The PING (stands for Packet Internet Groper) command is used to detect whether a
specific IP address is accessible by sending a packet to the specific address and waiting for
a reply. It’s also a very useful tool to confirm the device installed or if the IP address
conflicts with any other devices over the network.
If you want to make sure the IP address of the device, utilize the PING command as
follows:
z Start a DOS window.
z Type ping x.x.x.x, where x.x.x.x is the IP address of the device.
The replies, as illustrated below, will provide an explanation to the problem.
If you want to detect any other devices conflicts with the IP address of Network Camera,
also can utilize the PING command but you must disconnect the device from the network
first.