AirLive CW-720 - Manual (Page 28)

4. Monitor the Image Section
23 AirLive CW-720 User’s Manual
4.2 Configure via Web UI
4.2.1 Network
Use this menu to configure the network to connect the device and the clients.
This section provides the menu for connecting the device through Ethernet cable.
MAC address:
Displays the Ethernet MAC address of the device. Note that a user can not change it.
Obtain IP address automatically (DHCP):
DHCP: Stands for Dynamic Host Configuration Protocol.
Enable this checked box when a DHCP server is installed on the network to issue IP
address assignment. With this setting, the IP address is assigned automatically. If this
device can not get an IP address within limited tries, the device will assign a default IP
address, 192.168.1.100, by itself as the default IP address.
IP address, Subnet mask, and Gateway:
If you do not select Obtain an IP address automatically, then you need to enter these
network parameters manually.
Obtain DNS from DHCP:
DNS: Stands for Domain Name System.