AirLive WL-2600CAM - Manual (Page 10)

AirLive WL-2600CAM User’s Manual 9
Chapter 3 Setting up Wireless Configuration
The wireless network has to be set up by using cable network connection. After setting the camera
correctly, the wireless function can work without cable network connection. Please follow the setting
process below step by step:
1. Connect IP Camera with Ethernet connection. (Check chapter 7.3.6 for more details)
2.Go to Setting → Basic → Network → Wireless choose option “On”. You will see the wireless setting
page.
2. Go to “Setting→Basic→Network→Wireless”, set the Wireless option to “ON” .
3. Then click “Refresh”. All access points (AP) around you will show up.
4. Select the AP you wish to connect.
5. Enter password at active transmit key if you need. If you don't know the setting of the wireless AP, please
ask your network administrator.