AirLive WL-2600CAM User Manual
Page 37
AirLive WL-2600CAM User’s Manual
36
¾
Use the following DNS server address: Select this when you set the fixed address as the IP
address of DNS server.
z
Primary DNS server: Enter the IP address of the primary DNS server.
z
Secondary DNS server: Enter the IP address of the secondary DNS server.
Note :
1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol for
encapsulating Point-to-Point Protocol frames insider Ethernet frames. PPPoE
connection is used mainly with ADSL service where individual users connect to the
ADSL transceiver (modem) over Ethernet work. It also widely used in XDSL (digital
affiliate line such as ADSL, VDSL or SDSL)
2. The IP Camera needs to be rebooted after it finishes changing the network
completely.
3. The IP Camera with Intelligent IP Installer can’t be founded after turning on the
PPPoE and reboot.