AirLive WL-2600CAM User Manual
Page 67
AirLive WL-2600CAM User’s Manual
66
7.5.2 Alarm sending
Set to send the mail with connection to the alarm detection by the external sensor input or by the built-in
motion detection function. Select On to send the image and file to SMTP server linked with the alarm
detection.
¾
Alarm sending: Select On to set to send mail with connection to the alarm detection.
¾
File attachment: Set whether an image file is attached to the mail sent or not. When On is
selected, the image file made by the settings below is attached. When Off is selected, only the
message is sent.
¾
Image file name: Type the file name you want to assign to the image to attach a mail. You can use
up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
¾
Suffix: Select a suffix to add to the file name
z
Date & time: The date & time suffix is added to the Image file name. The date/time suffix
consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits),
minute (2 digits), second (2 digits), and consecutive number (2 digits), thus 14-digit number is
added to the file name.
z
Sequence number: A consecutive number of 10 digits between 0000000001 and 4294967295
and two fixed digits 00 is added to the Image file name.
z
Sequence number clear: Click Clear and the suffix of the sequence number returns
to 1.