Aladdin Light Lift ALL200RM-CM-240V - Manual (Page 7)

STEP 8
Turn off supply power before wiring ALL200RM motor switch. Turn off motor switch in square box. Wire
motor switch with 230V wiring. The 230V motor feed must be kept separate from 230V light switch leg.
Keep motor and light hots separate. One motor hot is black and 14 gauge. The other is white and 14 gauge.
Only wire motor switch at this time. See Diagram G.
Never wire the ALL200RM improperly. Make sure electricity is turned off when installing and/or
performing maintenance on the ALL200RM. Improper wiring and/or electricity could cause death,
personal injury, and/or property damage.
Aladdin 14 Gauge Motor Hot
(White)
Aladdin 14 Gauge Motor Hot
(Black)
230V House Hot
For Motor
230V House Hot
For Motor
Diagram G
Light Motor
Do Not Wire Light
Switch At This Time
Aladdin 12 Gauge Light Hot
(Black)
Aladdin 12 Gauge Light Hot
(White)