Aladdin Light Lift ALL1000RM-CM-240V - Manual (Page 6)

STEP 6
Position ALL1000RM motor assembly where it will be mounted. Adjustments can be made loosening 3/8”
channel strut bolts that hold ALL1000RM motor assembly to channel struts. Retighten channel strut bolts
after adjustments are made. Confirm strut nuts are seated properly. See Diagram F.
Never adjust the channel struts improperly. This could cause the chandelier to fall, which could cause
death, personal injury, and/or property damage.
STEP 7
Securely fasten ALL1000RM motor assembly to a suitable structure using 5/16” lag bolts and 5/16” fender
washers included in parts bag. See Diagram F.
Never install the ALL1000RM without properly fastening it to a suitable structure. This could interfere
with the safety and operation of the ALL1000RM and could cause the chandelier to fall, which could
cause death, personal injury, and/or property damage.
5/16” Lag Bolts
5/16” FenderWashers
Diagram F
3/8” Channel Strut
Adjustment Bolts
3/8” Channel Strut
Adjustment Bolts