Safety practices – Autoquip FREIGHTLIFT FLH User Manual
Page 10
10
WARNING
!
Never operate unit when parts are broken or damaged! Do not operate
this equipment when non-factory approved or damaged parts are in use!
Contact the local FREIGHTLIFT Service Representative to rectify all such
situations.
WARNING
!
Velocity fuse lock-up requires factory help! Contact your local
FREIGHTLIFT representative or call Autoquip Service Department if
hydraulic velocity fuses should lock up!
WARNING!
Do not weld on the guide flanges of the masts! Interfering with the free
travel of the wheel guides could cause permanent damage to the lift and
prevent safety devices from operating as intended.
WARNING
!
Use properly rated hoses only! Never use fittings or hoses that are not
properly rated for the intended use.
SAFETY PRACTICES