Barranca Diamond FIREBALL 2 AXLE SPHERE MACHINE User Manual
Page 3
Barranca Diamond Products Phone: 310-523-5867 www.barrancadiamnd.com
SAFETY PRECAUTIONS
Read and follow all safety, operating and maintenance instructions. Failure to read and follow these
instructions could result in injury or death to you or others. Failure to read and follow these instructions
could also result in damage and/or reduced equipment life. In order to prevent injury, the following safety
precautions should be followed at all times!
KEEP GUARDS IN PLACE
In order to prevent injury, keep guards in place and in working order at all times.
ELECTRICAL SHOCK!
Never touch electrical wires or components while the motor is running. Exposed, frayed or worn electrical
motor wiring can be sources of electrical shock that could cause severe injury or burns.
ACCIDENTAL STARTS!
Before starting the motor, be sure the ON/OFF switch is in the “OFF" position to prevent accidental starting.
Place the ON/OFF switch in the OFF position and unplug cord prior to servicing, repairs or maintenance.
ROTATING OR MOVING PARTS
Keep hands, feet, hair, and clothing away from all moving parts to prevent injury. Never operate a power tool
with shrouds or guards removed.
ALWAYS USE SAFETY GLASSES
Safety glasses should always be worn when working around power tools. Everyday eyeglasses only have
impact resistant lenses and may not prevent eye injury; they are NOT safety glasses.
ALWAYS USE HEARING PROTECTION!
To reduce the possibility of hearing loss, always use hearing protection when operating equipment.
REMOVE ADJUSTING KEYS AND WRENCHES
Form a habit of checking to see that keys and adjusting wrenches are removed from the power tool before it
is turned on.
KEEP WORK AREA CLEAN
Cluttered work areas and benches invite accidents.
DO NOT USE IN DANGEROUS ENVIRONMENTS
Do not operate equipment in dangerous environments. Always keep the work area well lighted.
KEEP CHILDREN AWAY
All visitors and children should be kept a safe distance from work area.
MAKE WORKSHOP KID PROOF
Make the workshops kid proof by using padlocks, master switches or by removing starter keys.
DO NOT FORCE THE TOOL
A power tool will do a job better and safer operating at the rate for which it was designed.
USE THE RIGHT TOOL
Do not force a tool or an attachment, to do a job that it was not designed to do.
WEAR PROPER APPAREL
Do not wear loose clothing, gloves, neckties, rings, bracelets or other jewelry that may be caught in moving
parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair.