Barranca Diamond FIREBALL 2 AXLE SPHERE MACHINE User Manual
Page 4
Barranca Diamond Fireball Sphere Machine Manual Effective Date 9/28/06
DO NOT OVERREACH
Keep proper footing and balance at all times by not overreaching.
MAINTAIN TOOLS WITH CARE
Keep tools sharp and clean for the best and safest performance. Always follow maintenance instructions for
lubricating and when changing accessories.
SHUTDOWN TOOL
The machine should always be shutdown before servicing or when changing accessories.
USE RECOMMENDED ACCESSORIES
Consult the owner’s manual for recommended accessories. Using improper accessories may increase the
risk of personal or by-stander injury.
NEVER LEAVE TOOL RUNNING UNATTENDED – TURN POWER OFF
Do not leave a tool until it comes to a complete stop. Always turn a power tool OFF when leaving the work
area, or, when a cut is finished.
CHECK FOR DAMAGED PARTS
Before using a power tool, check for damaged parts. A guard or any other part that is damaged should be
carefully checked to determine it would operate properly and perform its intended function. Always check
moving parts for proper alignment or binding. Check for broken parts, mountings and all other conditions
that may affect the operation of the power tool. A guard or any damaged part should be properly repaired or
replaced.