Barranca Diamond GP6-6 Wheel Cab Maker - Manual (Page 10)

10
CONTENTS
In the shipping crate, you will find one Barranca Diamond GP6-6 Wheel Cab Maker mounted to a 3/4"
plastic baseboard with four diamond Nova wheels 6" x 1-1/2" and two brazed diamond wheels 6" x
1-1/2". The accessories for the GP6-6 Wheel Cab Maker include, Tool Cool bottle, submersible pump
and tubing, leather pad, three diamond paste syringes, three Polytex pads, 3M On/Off cement, one
Ground Fault Circuit Interrupter (GFCI), one Loc-Line manifold and one 6" leather pad.
UNPACKING
Your GP6-6 Wheel Cab Maker has been shipped from the factory thoroughly inspected and tested.
Remove the crating material (wood and plastic) from the baseboard and around the machine carefully
using a Phillips and standard screwdriver, wire cutter and box cutter knife. Any accessories should be
removed from the unit and put aside.
TRANSPORT
For safe transport, disconnect the submersible pump and power cord and remove lubricant and water
from the wheel reservoirs.
GP6-6 WHEEL CAB MAKER SETUP
Accessories