Barranca Diamond GP6-6 Wheel Cab Maker - Manual (Page 9)

9
GP6-6 Wheel Cab Maker SPECIFICATIONS
Part No: 170553
Weight: 81 lbs (115 lbs. crated)
Main Motor: Baldor Model
Horsepower: 1/3 HP
Motor Voltage/Frequency: 110 volt/60Hz
Amperage: 3.6 Amps
Motor RPM: 1,800 RPM Fixed
Motor Arbor Diameter: 5/8"
Duty: Continuous
Motor Arbor Bearings: Ball Bearings, permanently sealed
Wheel Arbor Flanges: 2" OD x 5/8" bore aluminum
Diamond Wheel Mesh Sizes: 80 and 200 mesh (170 mesh may be substituted)
Diamond Resin Nova Wheels: 280, 600, 1200, and 3000 mesh 6" x 1-1/2" wide wheels
Shaft Type: 5/8" precision machined 4144 steel
Wheel and Blade Flanges: Aluminum 2" OD x 5/8" bore
Wheel Spacers: 7/8" OD x 5/8" ID aluminum (length varies for wheels and drum)
Convex Polishing End Hub: 6" aluminum hub disc with 5/8"-11" right hand thread
Water Pump: MK Submersible pump (part #155987), variable flow control with
1/4" ID tubing.
Water Control Valves: 6 stainless steel control valves, plastic lever cock valve with barb for
1/4" ID tubing mounted on rear of the hood.
Included Accessories: 6" resin diamond pad set (14,000 mesh)
Three 6" Polytex pads (adhesive backed)
Three diamond paste syringes
8,000, 14,000, 50,000 mesh diamond paste
6" leather buffing pad
3M On-Off cement
Submersible electric water pump
Water pump tubing
Loc-Line magnetic manifold and nozzle links/tips
GFCI Switch (110 volt units only)
GP6-6 WHEEL CAB MAKER SPECIFICATIONS