Barranca Diamond GP6-6 Wheel Cab Maker - Manual (Page 20)

20
GP6-6 SHAFT DISASSEMBLY, RIGHT HAND SIDE
1. Remove the polishing hub on the right side of the arbor shaft by turning it clockwise (Fig 23).
2 Loosen the adapter that secures the wheel (Fig 24).
3. Remove the Diamond wheels, flanges and spacers from the shaft.
GP6-6 SHAFT DISASSEMBLY, LEFT HAND SIDE
1. With an adjustable or box wrench, remove the jam nut on the left end of the arbor shaft by turning
it clockwise. This is left hand threaded.
2 Remove the Diamond wheels, flanges and spacers from the shaft.
GP6-6 WHEEL CAB MAKER MAINTENANCE
Fig 23 - Remove polishing hub Fig 24 - Loosen the adapter