Barranca Diamond MK-5005S Block Saw - Manual (Page 21)

21
DO NOT FORCE TOOL, it will do the job better and safer at the rate for which
it was designed.
(E)
Verify proper cooling flow on
both sides of the blade
(D)
Open the Cooling Flow Control
Valve and adjust flow
(F)
Slowly push piece toward blade
to begin the cut
(H)
Turn the saw off when
work is complete
(G)
Continue pushing piece into
blade until cut is complete
caUTIoN
MK-5005S oPERaTIoN