BELLA 13057 10 x 18 Griddle - Manual (Page 11)

11
Care & Cleaning Instructions
CAUTION: Do not immerse the cord, plug or temperature control probe in
water or any other liquid.
CAUTION: To avoid accidental burns, allow your Griddle to cool thoroughly
before cleaning.
1. When cooking is completed, unplug cord from wall outlet.
Allow Griddle to cool.
2. Remove temperature control probe from Griddle.
CAUTION: The probe may become hot after use. Allow to cool
before handling.
3. If necessary, wipe temperature control case and probe with a damp, soft
cloth. Dry temperature control probe completely. Set aside.
CAUTION: The temperature control probe is not submersible.
4. Remove drip tray; empty contents. Wash Griddle and drip tray in soapy
water; rinse and dry thoroughly.
5. The Griddle and drip tray are dishwasher safe.
6. To wash by hand, immerse Griddle in hot, sudsy water. Clean thoroughly
using a sponge or soft cloth. Rinse in hot water. Dry completely.
CAUTION: Probe and probe receptacle must be completely dry
before use.
7. For stubborn food particles, loosen with a plastic cleaning pad.
Avoid hard scouring of the non-stick finish as this may cause surface
scratches. Do not use steel wool, scouring pads, or abrasive cleaners on
any part of the Griddle.
Storing Instructions
1. Unplug unit and allow to cool. Never store the Griddle while it is hot or
still plugged in.
2. Clean the Griddle thoroughly before storing.
3. Store the temperature control probe under the griddle. Wrap the cord
around the grill tilt lever as shown below. (See Figure 2.)
4. Store the clean Griddle in its box or in a clean, dry place.
Figure 2