BKI COq Convection Oven - Manual (Page 13)

Convection Oven Operation
11
Cooking
Start the controller and follow the procedure below to Cook with a programmed Recipe.
Use ។ and ៓ arrows to highlight
desired Recipe.
Touch highlighted Recipe to preview
its setting.
Touch GO to start highlighted
Recipe.
Use ។ and ៓ arrows to toggle
between screens.
Touch ፤ ፤ ፤ ፤ in either screen to return
to Recipe List.
Touch Preheat to start heating the
oven to the programmed
temperature.
Touch Cook to go directly the to
Cook Start screen.
(Preheating the oven before cooking
is highly recommended.)
COMMON SCREEN FUNCTIONS
Touching ፤ ፤ ፤ ፤ for 3 seconds on any
screen cancels the cook cycle &
returns to the Recipe List.
Touching [T] on any screen displays
the actual oven temperature for 3
seconds.
The small inverse H to the right of
the temperature is displayed when
the heating elements are energized.
Touching Extra in any screen
displayed activates the Extra Cook
screen to add extra time to the
programmed cook time.
Use ។ and ៓ arrows to adjust
Extra Cook value in 5 minute
increments.
Touch GO to add Extra time &
return to previous Recipe screen.
While oven is Preheating - screen
displays programmed Preheat
temperature.
Fan Speed
Screen displays when the oven is
preheated. Load product in the
oven, close the door and touch
COOK to start cooking.
Progress bar displays
percentage of total
Recipe time completed.
Time displayed is total
remaining Recipe time.
Single Segment Recipe Multi-Segment Recipe
Progress bar is divided
into number of Recipe
segments & displays
percentage of total
Recipe time completed.
Time displayed is total
remaining Recipe time.
End of Cook Cycle without Hold
The controller will beep and the
screen will flash until the screen is
touched. The display shows the Time
elapsed since the end of the Cook
Cycle (no temperature is displayed).
Add Extra Cook time if required or
touch
፤ ፤ ፤ ፤ for 3 seconds to return to the
Recipe List.
End of Cook Cycle with Hold
The controller will emit three 2
second beeps. The display shows
programmed Hold Temperature and
the Time elapsed since the end of
the Cook Cycle.
Add Extra Cook time if required or
touch
፤ ፤ ፤ ፤ for 3 seconds to return to
the Recipe List.
Fan Speed is manually
controlled with a switch
on control panel below
touch screen
controller.