BKI COq Convection Oven - Manual (Page 17)

Convection Oven Operation
15
Controller Configuration
Configure the Controller inputs and outputs for this appliance.
Enter Oven Set Up screen
as described previously.
Touch X in any screen
displayed to return to the
previous screen.
Touch Factory Cfg.
Touch T beside
parameter.
P1 & P2 toggle between
OFF, Cook & Product
temperature.
S1 & S2 toggle between
OFF, End & Extra Time.
Touch to SAVE settings.
Hyst: change control
hysteresis from 1F to 10F in
1F increments.
Ex T: toggles extra time
increments between 1 min.
and 5 min.
T Off: adjusts cook
temperature offset between
-50F & +50F in 1F
increments.
D Alm: toggles 25F door
alarm ON or OFF.
Pre T: adjust idle shutdown
time from OFF to 10, 20 or
30 min.
SmCk: adjust intuitive cook
factor from OFF to values 5-
15 in 0.5 increments.
Touch T beside
parameter.
R1, R2 & D1 toggle
between OFF, Heat, Fan
Power, Lamp & Fan
Speed.
V1 toggles between OFF
& Fan Speed.
Touch to SAVE settings.
Touch E beside parameter
to open a numeric window to
enter parameter value.
Idle: idle power consumption.
Heat: heater power
consumption.
Fan: fan power consumption.
Touch to SAVE settings.
CK: measured Cook probe
temperature.
PR: measured Product
probe temperature.
End: state of End switch.
Ext: state of Extra switch.
(OP=open, CL=closed)
Heat: toggles Heat output
ON & OFF.
Lmp: toggles Lamp output
ON & OFF.
FanP: toggles Fan output
ON & OFF.
V1.10: software version
(value may differ).
FanS: toggles Fan Speed
between HI & LO.
Time: elapsed running time
of controller.
ង