BKI DR-34 Double Revolving Oven - Manual (Page 16)

Double Revolving Oven Maintenance
14
Problem Cause Possible Solution
Oven is very slow to heat up. Improper power line voltage. Contact an authorized BKI service
agent for corrective action.
Heating elements not
functioning. Contact an authorized BKI service
agent for corrective action.
Control displays “PROB”. Damaged probe. Contact an authorized BKI service
agent for corrective action.
Thermocouple connection is
loose.
Contact an authorized BKI service
agent for corrective action.
Control displays “EEEE”. Temperature inside the oven is
below 50° F. Reprogram the controller.
Time/Temperature controller
has failed.
Contact an authorized BKI service
agent for corrective action.
Rotors not turning (Rotating). Dirty or greasy Planetary/Sun
gears. Clean and lubricate Planetary/Sun
gears.
Motor circuit breaker tripped. Press the reset button on front
panel.
Rotor switch not functioning. Contact an authorized BKI service
agent for corrective action.
Rotor Motor failure. Contact an authorized BKI service
agent for corrective action.
Drive Belt failure. Contact an authorized BKI service
agent for corrective action.
Product not cooked thoroughly Oven not preheated. Be sure to preheat the oven to
300 degrees before placing
product in oven.
Improper time and temperature. Check program for proper time
and temperature setting.