Unpacking and inspection freight damage procedure – Carter-Hoffmann MDPM4 User Manual

Page 4

Advertising
background image

4

UNPACKING AND INSPECTION

FREIGHT DAMAGE PROCEDURE

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged
by skilled personnel before leaving the factory. Upon acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.


IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or

express receipt, and that the note of loss or damage is signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of damage. Contact your dealer

immediately.

3. CONCEALED DAMAGE: If damage is unnoticed until the merchandise is unpacked, notify the transporta-

tion company or carrier immediately, and then file a “CONCEALED DAMAGE” claim with them. This should
be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the con-
tainer for inspection
.



Carter-Hoffmann cannot assume liability for damage or loss incurred in transit, freight damage is not covered
under warranty
. We will, however, at your request, supply you with the necessary documents to support your
claim.

1. Remove the cabinet from shipping carton, ensuring that all packing ma-

terials and protective plastic has been removed from the unit. Inspect all
components for completeness and condition.

2. If any freight damage is present, a freight claim must be filed immediately

with the shipping company.

3. Freight damage is not covered under warranty.

4. Check to insure all components are included; cabinet, product caddy,

instruction packet and any additional accessories.

5. Read operation instructions completely.

6. Appliance should be thoroughly cleaned before use. See CLEANING

INSTRUCTIONS, page eight.

7.

Connect power cord to grounded and properly wired electrical source as
specified. Electrical specifications are indicated on the serial tag on the
cabinet (see sample tag below).

This appliance
should be
thoroughly

cleaned prior to use.

See the CLEANING
INSTRUCTIONS, on page 8
of this manual.

NOTE: DO NOT discard
the carton or other packing
materials until you have
inspected the appliance for
hidden damage and tested
it for proper operation.

Refer to SHIPPING DAM-
AGE CLAIM PROCEDURE
below.

Model Number

Electrical Specifications

Serial Number — Manufacture Date

Advertising
This manual is related to the following products: