Carter-Hoffmann SR1820 - Manual (Page 4)

4
MODEL
NUMBER
OVERALL DIMENSIONS
CASTER
DIAMETER
SHIPPING
WEIGHT
HEIGHT DEPTH WIDTH
12”x20”x2.5” 18”x26” in mm in mm in mm in mm lbs kgs
SR188 12 6 45 1/2 597 35 889 31 3/4 806 6 152 285 130
SR1820 24 12 67 1/2 1715 35 889 31 3/4 806 6 152 440 200
PAN CAPACITY*
DOOR...Recessed within cart walls, top
and base. Welded double panel
stainless steel pocket door. Filled with
2” thick high density fiberglass insula-
tion. Large curved door handle for easy
grasp.
HINGES...12 gauge stainless steel
strap hinges with 3/8” diameter stainless
steel pins, fully welded to cabinet and
doors.
DOOR CLOSURE... Pocket style door
with magnetic closure. Gasketless de-
sign with side-mounted transport latch
with padlock provision.
HANDLE...SR188: Two horizontal full
width stainless steel tubular handles,
mounted to sides of cabinet on top
edge. SR1820: Four 1” stainless steel
tubular handles. Two vertically mounted
and bolted with backup plates to each
side of cabinet.
RACK ASSEMBLIES… Removable
solid stainless steel universal slides
placed into removable stainless steel
baffles. Tray slides fully adjustable at 1-
3/4” spacing. Standard spacing at 3-1/2”
centers. CONSTRUCTION...Completely welded
double wall cabinet construction with
outer cabinet formed and welded to
base. All seams turned in to eliminate
raw edges.
CABINET MATERIAL...All stainless
steel; polished exterior.
BASE FRAME...12 gauge stainless
steel full depth caster bolsters.
CASTERS...6” diameter, industrial
grade balloon casters. Plate mounted
and bolted to base in offset, wheel-
ahead pattern. Delrin sleeve axle bear-
ings and double ball bearing swivel.
Zerk grease fittings. Two casters fitted
with brakes.
BUMPER...Non-marking gray vinyl
bumper set in heavy-duty 3/16” thick
extruded aluminum frame with rein-
forced corner cutouts.
INSULATION...2” thick, high density
continuous wrap-around type fiberglass
insulation.
THERMOMETER...Dial type with re-
mote sensing bulb and sensing bulb
protector. HEATING SYSTEM...1500 watt blower
heater located in top of cabinet. Pat-
ented solid-to-solid phase change heat
retention material heated by 950 watt
tubular element, located in bottom of
cabinet. High impedence protected,
internally cooled fan motor. Auto reset
high-limit switch to protect all internal
electrical components. Recessed con-
trol panel. Two position toggle switch
with convection and EnduraHeat set-
tings. Power indicating light, Endura-
Heat charge ready light, full range ther-
mostat control knob.
ELECTRICAL CHARACTERISTICS...
Operates on 120 volts, 60 cycle, single
phase, 1500 watts, 12.8 amps. Ten foot
power cord with 3 prong grounding plug.
NEMA 5-20P.
PERFORMANCE...Capable of heating
to 200°
F (94C°). Convection preheat to
160° F (71°C) in approximately 30 min-
utes. EnduraHeat mode charge time
and preheat in approximately one hour.
Preheat in standard convection mode is
20 minutes.
ACCESSORIES/OPTIONS...
-Alternate caster sizes and types
-Four wheel brakes
-Menu card holder (5”x7” or 8.5”x11”)
-6” extended width tray slides
-Alternate electrical configuration
PRODUCT SPECIFICATIONS AND OPERATING FEATURES
NOTE: Specifications subject to change through product improvement & innovation.
*Standard tray slide spacing at 3.5”. Tray slides are adjustable at 1.5” spacing to accommodate varying pan depths. SR1820
US Patent Nos. 7,102,103 B2 & 7,394,042 B2