Carter-Hoffmann PHW1822 User Manual
Page 13
13
MAINTENANCE
CASTERS
Some cabinets may have caster bearings that are equipped with
Zerk grease fittings so that they may be easily lubricated with a
grease gun. Lubricate bearings at least once every six months.
Lubrication will be required more often if cabinet is cleaned with a
hot water or steam cleaning system. Casters with special sealed
bearings are recommended for frequent cart wash or steam clean-
ing systems.
LATCHES & HINGES
Make sure all joints remain sealed and door latches do not stick. If
necessary, use WD-40, silicone spray, graphite or other commer-
cial lubricants for aluminum products, to keep door latches &
hinges from sticking. Do not use oil.
FOR CABINETS WITH PERIMETER BUMPERS
Vinyl which has been dislodged from the channel due to severe
bumping or scraping can be pried back into place with a common
screwdriver.
CAUTION:
Do not move cabinet
unless door is se-
curely closed. Serious dam-
age to hinges and door may
result if bumped into tables,
walls, or other equipment when
the doors are open.