chiliGREEN Mitac 9515 - Manual (Page 100)

Troubleshooting 8-11
z
Turn off power management.
Power Management Problems
The computer does not enter Sleep or Hibernation mode
automatically.
z
If you have a connection to another computer, the computer does not
enter Sleep or Hibernation mode if the connection is actively in use.
z
Make sure that the Sleep or Hibernation time-out is enabled.
The computer does not enter Sleep or Hibernation mode
immediately.
z
If the computer is performing an operation, it normally waits for the
operation to finish.
The computer does not resume from Sleep or Hibernation mode.
z
The computer automatically enters Sleep or Hibernation mode when
the battery pack is empty. Do any one of the following:
− Connect the AC adapter to the computer.
− Replace the empty battery pack with a fully charged one.
The computer does not enter Sleep or Hibernation mode with the
Fn + F12 hot keys.
z
Make sure that the Sleep or Hibernate function is specified for the
sleep button.
z
You might be using an ExpressCard that prevents the computer from
entering Sleep mode. To enter the mode, stop the communication
program and then remove the card or stop the card.
Software Problems
An application program does not work correctly.
z
Make sure that the software is correctly installed.