CiDRA SONARtrac HD VF-100 - Manual (Page 64)

Copyright © 2006 CiDRA Corporation Page 9-12
20638-02 Rev 01
The following figure shows the display when the system is collecting
data to calculate a measurement. The ‘------‘ indicates the system is
unable to make a measurement, or an internal parameter was
changed that has caused the system to re-initialize.
V
F
------ gal/min
T
O
T
19345 gal
VF INITIALIZE MODE VF /
Figure 56 Initialization Mode
9.5.2 Menu Mode
This mode of operation permits the user to adjust various settings on
the SONARtrac
TM transmitter as well as perform multiple diagnostic
tests. The menu system is set up in a tree format, with seven top level
categories (illustrated in bold print below) that can each have up to
two levels of sub menus. The menu structure is shown in the table on
the following page.