Beltronics 980 - Manual (Page 10)


X/K/Ka Band On or Off (bel 980 only)
Select “
X o n /X o f f
”,“
K o n /K o f f
” or “
Ka o n /Ka o f f
”
depending upon your driving environment and
selectivity requirements. This mode is especially useful
where falsing may occur and disabling the offending band
may be required. Factory setting is on for all three Bands.
Auto-Mute On/Off
With “
A m u t e o n ” , unit will provide several X, K, Super
Wideband Ka audio alerts followed by the Digital Voice
announcement of the signal detected. After the Digital Voice
announcement, a “clicking” tone keeps you quietly informed
for as long as the signal is present. This clicking become more
rapid as the strength of the Radar signal increases.“
A m u t e
enables you to conveniently monitor extended encounters
without having to manually mute or adjust the volume
setting.
With “
A m u t e o f f
, ” unit will provide a continuous series of
X, K, Super Wideband Ka audio alerts and Digital Voice
announcement of the signal detected. Digital Voice prompts
are provided once after the initial audio alert. This standard
setting is often preferred when background noise in a vehicle
is loud. Factory setting is “
A m u t e o f f . ”
Note—because of their urgency, Laser alerts are not affected.
Radar/Laser Digital Voice Prompts
With “
V o i c e o n ” , unit will provide Digital Voice prompts
followed by “beeps” when X/K/Ka and Laser signals are
detected. With “
V o i c e o f f ” , unit will sound unique audio
tones only. Factory setting is “
V o i c e o n ” .
Safety Warning System ®
(sws
™
)
With “
S W S o n ” , unit will provide a Message when signals from
sws
™ transmitters are detected. Factory setting is “
S W S o n ” .
Safety Warning System ®
(sws
™ ) with Digital Voice Messages
When “
SWSv o i c e
” is selected, unit will provide Digital Voice
announcements when sws ™ transmitters are detected. Factory 
o n ”