Beltronics 980 - Manual (Page 9)

approach for improving selectivity on X, K and Super
Wideband Ka and is ideal for use in areas with a high level of
microwave transmissions which can cause falsing on all
Radar bands.
While in City All mode, bel 980 will provide an initial short
X, K, or Ka audio alert coupled with visual confirmation of the
band detected and signal strength in the display. No further
audible alert is provided until the signal strength reaches a
preset level. When no audio alert is provided, the visual alert
keeps you quietly informed.
Note—Once “
CTY X
” or “
CTY ALL
” is chosen in Selectable
Features the cty button must to be pressed to engage your
selection.
sele c table fe at u res
The following features may be selected, depending upon your
driving environment.
■ City X or City All (available on bel 980 only)
■ X/K/Ka Band on or off (available on bel 980 only)
■ Auto Mute on or off
■ Radar/Laser Digital Voice Prompts or “beeps”
■ Safety Warning System® on or off
■ Safety Warning System® Digital Voice on or off
■ Audio/Visual Scroll Rate (fast or slow)
City X or City All (available on bel 980 only)
When “
CTY X
” is selected, your unit provides standard X
Band selectivity, which is suitable for most urban areas. City
All provides an increased level of selectivity on all Bands and
is designed for use in high density microwave areas. Factory
setting is “
CTY X
”.
Note—once “
CTY X
” or “
CTY ALL
” is chosen in
Selectable Features, the cty button must be pressed to engage
your selection.
