Beltronics 980 - Manual (Page 11)

setting is “
SWSv o i c e
”. When “
SWSt o n e
” is selected, Digital
Voice is replaced by "tone/clicking” only. Factory setting is
“
SWSv o i c e
”.
Audio/Visual Scroll Rate
When “
SCRLs l o w
” is selected, unit will provide a slow cycling
of audio/visual messages.When “
SCRLf a s t
” is selected, unit
will provide a fast cycling of audio/visual messages. Factory
setting is “
SCRLs l o w .
”
Entering Selectable Features Mode
1.
With the unit off, press and hold the pwr and cty buttons
simultaneously. The word “
FEATURES
” will appear in the
display and a short audible “beep” will sound indicating you
are now in the Selectable Features Mode.
2.
Immediately after the “beep”, the display will show the status
of the first Selectable Feature (City X or City All).
3.
Press the aud button to make your selection. Press the cty
button to move to the next Selectable Feature. (To move
backward in the list, press the drk button.) Repeat the process
until you have made your selection for each Selectable Feature.
4.
Press the pwr button to exit Selectable Features mode. Two
“beeps” confirm that you have exited this mode and either
“
HI GHWAY
” or “
CITY
” will be presented in the display, based
on your previous selection. Your unit is ready for operation.
i ns ta l l at io n
General Guidelines
Do not mount your unit directly behind windshield wipers or
mirrored sunscreens which block Radar and Laser signals
and substantially reduce warning range. Unlike “after market”
mirrored sun-screens, regular tinted glass does not affect
Radar reception. Radar signals are also reflected by “heated
windshields” known as Instaclear
® and ElectriClear ® available
 Instaclear is a registered trademark of the Ford Motor Company.
ElectriClear is a registered Trademark of Libbey, Owens, Ford, and Delco-Remy.