COATS 6200HS Truck Wheel Balancer - Manual (Page 13)

Operation Guide
7
6. Rim Width Knob.
Turn the Rim Width Knob to set rim width as measured
with the callipers. Read the selection in the Display
Window.
7. Offset Knob.
Turn the Offset Knob to set rim offset, or distance. Read
the selection in the Display Window.
Offset Scale
Offset, or rim distance, is a measurement of where the
wheel is mounted relative to the body of the balancer.
The offset scale measures this distance. The offset
scale is located at the top rear of the head. The offset
value is read at the point where the scale arm enters
into the housing. This value is input with the Rim Offset
dial on the input panel. The scale is spring-loaded and
will return to its resting position when released.
Calipers
The calipers are used to measure the width of the rim
of the wheel being balanced. The width is then
programmed with the Rim Width dial on the input panel.
7 6