COATS 6200HS Truck Wheel Balancer User Manual
Page 18
12
Coats Model 6200HS
Balancing Errors.
The crank handle has a one-way clutch for operator
safety, which also ensures that the wheel is spun in
the correct direction. It is however possible to spin the
wheel in the wrong direction (counter clockwise) when
using the Hub Nut. If this error occurs it will be identified
by an ‘EEE’ appearing in the Display Window.
If the wheel is intentionally (manually aborted) or
accidentally (wheel touches floor or operator) slowed
or stopped during the measuring cycle, ‘EEE’ will also
appear in the Display Window.
Spinning the wheel in the proper direction up to
balancing speed will remove this error and allow the
balancer to function normally.
In some cases when a very light wheel (i.e. a 13"
automobile wheel) is being balanced, ‘EEE’ may
appear. Re-spinning at a higher speed will prevent this
occurring and allow such wheels to be balanced.