COATS Vero Series Wheel Balancer - Manual (Page 24)

18 • Important: Always read and follow instructions.
ProBalance™ Technology
Any excessive residual unbalance is detected when
using ProBalance Technology mode, see Balance Mode
Icons, page 11. When activated, an enabled icon will
display on the dashboard (figure 26).
Figure 26 - ProBalance Technology Enabled Icon
1. After correcting for dynamic unbalance, and exces-
sive residual unbalance is detected over tolerance, then
a PRESS TO CORRECT icon button will display on the
dashboard (figure 27). Press the button.
Figure 27 - PRESS TO CORRECT Icon Button
2. The balancer stops and automatically positions the
wheel at the ProBalance correction location. Now attach
the specified corrective weight amount (figure 28) at
the 12 o’clock position in the center of the rim channel
(as displayed in graphic on wheel balancer).
Figure 28 - ProBalance Corrective Weight Amount
3. Respin tire/wheel to check balance.
Figure 29 - ProBalance Technology Success Button
ENABLED
PRESS TO
CORRECT
Excessive Residual
Imbalance Detected
0.25
SUCCESSFUL