COATS 9500R Electro-Hydraulic Tire Changer - Manual (Page 13)

COATS 9500R Tire Changer • 9
7. Continue rotating the chuck, moving tool holder
carriage towards the outside until the beads are
demounted from the rim (fig.20 and fig.21)
Fig.20
Fig.21
Ensure that the outer bead slides into the
drop center opposite to the tool, otherwise
the demounting operation is impossible.
8. Move to the front of the tire and hold it with both
hands in the last part of demounting operation to pre-
vent the tire from falling or rolling away out of control
(fig.22).
Fig.22
CAUTION