COATS 9500R Electro-Hydraulic Tire Changer User Manual
Page 14
5.3 Mounting Tubeless Truck Tires (Up to
13” Wide)
1. Liberally lubricate the entire inner surface of the
rim and the tire beads. Attach the mounting clamp
(fig.23) to the outer rim flange with the valve at 11
o’clock and the clamp at 12 o’clock.
Fig.23
If the rim is made of a light-alloy, the rim shape may
not allow the standard mounting clamp to be attached.
In such a case use the light-alloy mounting clamp
(option). The clamp can be used as shown in fig.24 or
25.
Fig.24
Fig.25
2. Move the chuck arm all the way down. Roll the tire
on the foot board and hang it onto the mounting clamp
(fig.26).
Fig.26
3. Lift the chuck arm and position the mounting hook
or tubeless roller approximately 1.5 cm (1/2”) to the
inside of the rim edge and approximately 1.5 cm (1/2”)
away from the rim edge (fig.27).
10 • COATS 9500R Tire Changer