COATS 9500R Electro-Hydraulic Tire Changer - Manual (Page 15)

COATS 9500R Tire Changer • 11
The mounting clamp is at approximately 11 o’clock.
Fig.27
Never use hand pressure to hold the tire
onto the rim as personal injury may result.
4. Turn the chuck clockwise until the tire is com-
pletely mounted (fig.28).
Fig.28
Ensure that the outer bead moves into the
drop center when the clamp is opposite to
the tool.
Stop the chuck before one complete turn is
made to avoid serious damage to the
mounting clamp and to the rim.
Do not inflate the tire on the machine. This
machine is not an inflation device.
For inflation place the wheel in an approved
inflation restraint device. Refer to OSHA
standard number 1910.177.
WARNING
CAUTION
CAUTION
CAUTION