Oil treatment, 1. ordinary maintenance – COATS CDH-4730 Electric-Hydraulic Tire Changer User Manual
Page 26
6
11. OIL TREATMENT
Treat oil waste disposal according to international and your local standards and regulations.
Oil is highly pollutant!!
Do not throw or release in the environment
Maintenance must be performed by authorized staff, only after disconnection of the plug from electric network
Regular maintenance in accordance with the instructions is essential for correct operation of the tire-changer and for its long working life.
Failure to perform regular maintenance may affect the machine’s operation and reliability, placing operator, vehicle and third
persons under potential hazard. Before any repairs or maintenance, disconnect the plug from the power supply.
Faulty parts must always be replaced by skilled staff, with original components.
Any removal or tampering with the safety devices constitutes a breach of the Regulations on Safety at Work.
In particular, the manufacturer can be held responsible NEITHER for complaints deriving from the use of non-original spare parts NOR
for damages caused by removal or tampering with the safety devices.
1. ORDINARy MAINTENANCE
Lubricate periodically the following parts, after having cleaned them carefully with naphta:
Carriage slides
Tool-holding arm slide
Tool housing (roller or double tool)
lifting cylinder of the clamping chuck arm
Use common lubricating grease available on the market.
WARNING!