COATS CDH-4730 Electric-Hydraulic Tire Changer - Manual (Page 6)

6
4. TRANSPORT, MOVING AND STORING
The machine is delivered in a cardboard box on wooden pallet.
The machine must be transported in its original package and kept in the position shown on the package itself.
Move the machine by means of a fork-lift truck having enough loading capacity. Fit the forks as shown in fig.4
Should the machine be temporarily stored, make sure that the storing place has the following requirements:
- Max. relative humidity: 95%
- Temperature: min. 32°F (0°C); max. 131°F (55°C)
5. UNPACKING
After having removed the package, make sure that the tire-changer has not suffered any damage during transportation. Take out the standard deli-
vered accessories too.
The package units must be stored in a safe place, out of children’s reach, being them a possible source of danger.
Keep the packing for possible future transport
Unpack the machine by using the related hook for lifting it. Originally placed on the main chassy, close to the clamping chuck arm (21, fig. 2). During
this phase pay attention not to damage the control unit, which is not fixed.
After placing the machine in its installation position, always remove the liftinf hook, which may interfere with regular oparation.
55,1 inch(1
00 mm)
9,5 inch(750 mm)
60 inch (15
0mm)
Fig.4
1092 lbs
(Kg. 495)