COATS Kit 85606689 Leverless Bead Lifter - Manual (Page 2)

2 • Important: Always read and follow the instructions.
Qualifying Test For
Machine Compatibility
1. Push down on mount/demount head while pulling
up on table top. Record distance — top of clamp to
bottom of mount/demount head.
2. Now, pull up on mount/demount head while push-
ing down on table top. Record distance — top of clamp
to bottom of mount/demount head.
3. Subtract step 1 distance from step 2 distance. If
distance is greater than 3/8-inch then machine is not
compatible.
Note: If the machine is not compatible, please con-
tact COATS® at 1-800-688-9240 for the Certified Ser-
vice Partner nearest you.