Condux CableGlider FO Cable Puller - Manual (Page 22)

22
C. FOOT CONTROL vALvE
PRObLEm:
Foot control pedal is sticking, will not return to neu-
tral.
SOLUTION:
• Remove item numbers 33, 32, 31, 30, knob steel, knob
flow adjustment, body spool stop upper & body spool
stop lower.
• Remove capscrew, spring & washer assembly.
• Confirm washer are flat, clean and lubricate the cap-
screw, spring and washer assembly.
• Re-assemble capscrew, spring and washer assembly to
the foot control assembly.
• Re-assemble body spool lower.
• Try foot control, if it works re-assemble body spool upper,
knob steel and flow adjustment.
• If foot control still sticks, loosen capscrew without remov-
ing body spool lower, move foot control up and down
full stroke, tighten capscrew and assemble body spool
upper, knob steel and knob flow adjustment.