Det-Tronics W867A, B 3001, 3002, 3003 UV/IR Explosion Proof Test Lamp - Manual (Page 4)

DEVICE REPAIR AND RETURN
The W867 UV/IR Test Lamp is not designed to be
repaired in the field. If the test lamp fails to operate
after fully charging the battery, return it to the factory for
repair.
Prior to returning devices, contact the nearest local
Detector Electronics office so that a Return Material
Identification (RMI) number can be assigned.
A
written statement describing the malfunction must
accompany the returned device or component to
assist and expedite finding the root cause of the
failure
.
Pack the unit properly. Always use sufficient packing
material in addition to an antistatic bag as protection
from electrostatic discharge.
NOTE
Inadequate packaging that ultimately causes
damage to the returned device during shipment
will result in a service charge to repair the
damage
incurred during shipment.
Return all equipment transportation prepaid to the
factory in Minneapolis.
ORDERING INFORMATION
When ordering, specify:
Part Number Description
004000-003 W867C3001 - 120 VAC
004000-004 W867C3002 - 220 VAC; 2 pin, Euro
004000-005 W867C3003 - 220 VAC; 3 pin, UK
NOTE
Includes test lamp with battery and charger.
For assistance in ordering, please contact:
Detector Electronics Corporation
6901 West 110th Street
Minneapolis, Minnesota 55438 USA
Operator: (952) 941-5665 or (800) 765-FIRE
Customer Service: (952) 946-6491
Fax: (952) 829-8750
Web site: www.det-tronics.com
E-mail: [email protected]
Environmental Protection
Waste electrical products should not be disposed of
with industrial and commercial waste. Please recycle
where facilities exist. Check with your Local Authority
or the local Detector Electronics offi ce for recycling
advice.
Detector Electronics Corporation
6901 West 110th Street • Minneapolis, Minnesota 55438 • Operator (952) 941-5665 or (800) 765-FIRE
Customer Service (952) 946-6491 • Fax (952) 829-8750 • www.det-tronics.com • E-mail: [email protected]