Det-Tronics EagleVision - PC User Manual
Page 30
7. Enter the desired update rate value in the box labeled “Now” under
Update Rate.
8. Enter the Destination Address(s). (Refer to step 7 under “DCU
Configuration” for instructions regarding selection of destination
addresses.)
9. Click on Accept. Click on Close to exit and return to the Point
Configuration screen, or use the scroll arrows to select the next point
for configuration.
A
GENT
R
ELEASE
M
ODULE
(ARM) C
ONFIGURATION
1. Highlight the desired address on the Point Configuration screen.
Click on the Modify Point button.
2. Click on the Define button.
3. Click on the ARM button, then click on OK. The ARM Configuration
screen will be displayed. See Figure V–10.
4. Type a tag name for the point in the space provided.
5. Assign a trigger for the point.
6. Select the desired release mode. If “Timed” is selected, the “Release
Time” field will be activated.
5.14
E
AGLE
Q
UANTUM
S
YSTEM
C
ONFIGURATION
FIGURE V-10
ARM Configuration Screen