Det-Tronics EagleVision - PC - Manual (Page 84)

A
LARM
H
ISTORY
The SAM stores the time and date of the last eight activations. This infor-
mation is displayed by pressing the Fetch Logs button. Circuit 1 or 2 will
be displayed to identify the output that was activated.
F
ETCH
L
OGS
B
UTTON
This button will retrieve the alarm logs.
From the Point Configuration screen, highlight the Power Supply
Monitor, then click on Display Point or select Point from the View menu.
The Power Supply Monitor Point Display screen will be displayed. See
Figure VII–15.
S
TATUS
I
NDICATORS
Bar Graph Display. The bar graph display shows the battery current
in amperes. A positive value indicates battery charging current, while a
negative value indicates battery discharge current. In normal operation
the current should be near zero.
Low Voltage. This indicator turns on when the input voltage to the
power supply monitor (PSM) is below 17.5 volts.
95-8479
7.27
E
AGLE
Q
UANTUM
P
OINT
D
ISPLAYS
P
OWER
S
UPPLY
M
ONITOR
(PSM)
P
OINT
D
ISPLAY
FIGURE VII-15
Power Supply Monitor
Point Display Screen