ECOXGEAR T2USB200: Tape 2 USB - Manual (Page 21)

Recording to a PC
To record audio to your computer:
1. Place the tape in the cassette tape compartment & press the play button to begin the tape.
2. Click the Record button to start recording.
The waves (top and bottom) will show on the interface.
3. Record the entire tape or at the end of each song, click the “Pause” button on the computer
(Audacity Interface Control Panel) to allow time to prepare for the next song or tape. Once you are
ready to continue recording, press the “Pause” button on the computer and downloading will
continue.
4. Repeat steps 2 and 3 until you have finished downloading.
NOTE: Do not click “Stop” button on computer while continuously downloading songs.
Remember to click “Pause” in between your desired songs. Press “Stop” on the
computer only when all your desired songs have been downloaded.
After you have finished downloading, you may play back the songs through your computer. In Stop
Mode, simply click the button.
20