ECOXGEAR T2USB200: Tape 2 USB - Manual (Page 8)

5. Press COUNTER RESET button to zero the counter to count the tape’s revolutions.
6. Press the REC button to start recording.
NOTE: IF the tape is a Cr02 version,
select the REC Cr02 button first,
then press REC PLAY button.
When you press the REC button the PLAY ( ) button will also be pressed automatically.
At the end of the cassette tape, the cassette will stop automatically.
7. To adjust the recording level, adjust the REC LEVEL knob. Ideal REC level is typically 0 dB.
You can view the REC level through the level indicator.
The REC level is located in front of the REC LEVEL knob.
NOTE: The ideal REC (recording) level is typically 0 dB.
Adjust the REC LEVEL while playing.
8. Fast Forward and Rewind.
Press the fast forward button to advance the tape
Press the rewind button to rewind the tape.
9. Pausing the playback / recording
NOTE: Pause your tape and pause your recording
by pressing the PAUSE button.
Pressing the PAUSE button again will resume
playing the tape and your recording.
10. Stopping the tape playback / recording
Press STOP/EJ to completely stop the tape
7
and stop recording.