ECOXGEAR T2USB200: Tape 2 USB - Manual (Page 22)

Export and Save Recordings (files) as WAV
¾ The easiest way to record your tapes is to play from start to finish on one side and record as a
single track. IF you need to flip the tape over to side 2, press the PAUSE button on Audacity,
until you are ready to continue recording. When you are ready to end your recording
(download) press the STO P ( ) button.
¾
You now have an audio file recorded (downloaded as a data based file) to your computer. You
can use this file using Audacity (Audacity .aup data file) only. In order to use the file outside
of Audacity, convert the file to an audio format. RECOMMENDATION: convert all files to
WAV format for exporting to your computer.
¾ To save as a WAV file, click on File, select Export As WAV and enter a file name and a location
for where to save the file on your computer.
RECOMMENDATION: save your files to your Desktop
¾ To playback recorded audio through your computer click the ( ) to play.
NOTE: For more details regarding Audacity operation and revised versions of Audacity
software, visit the Audacity website at http://audacity.sourceforge.net .
Dividing Tracks & Exporting
Should you wish to divide a song or a series of song after recording you track:
1. Press ( ) button to return to the beginning of the track.
2. Move cursor to the wave graphic area, left click mouse and hold then drag from left to right.
Release the mouse when the first song area has been highlighted.
21